| |
Input Voltage:
Input Frequency:
Input Current:
Load Range:
Ripple and Noise:
Line Regulation:
Load Regulation:
Hold Up Time:
Output Power:
Power Good:
Power Fail:
Efficiency:
Altitude:
Protection:
Temperature:
Humidity:
Connectors:
Dimensions:
MTBF: |
|
90~265VAC
47~63Hz
Not exceed 30A at 115VAC input or 60A AC input, at cold
start 25°C
When all outputs are at 60% rated load condition, the +5V output
is set between 4.90~5.10V and all other outputs are within the
specified voltage accuracy range
Peak to peak ripple and noise for each output is < 1% of each
output voltage at rated load 115~230VAC
< +/-1% at rated load with +/-10% change in input voltage
The output voltage load regulation is less than the values on the
table when each output loading changes +/-40% from 60% rated
load while all other outputs at 60% rated load
14ms typ. from the last AC line charging pulse to the point when
+5V drops down to +4.75V
Total DC continuous power is whthin 200W at 40°C ambient
temperature. If the input voltage is < 100VAC, total DC continuous
power should not exceed 180W
Goes high 100~500ms after all DC output are ready
Goes low 1ms before any DC output falls
> 65% at nominal line and rated load
10,000 feet
Built-in crowbar circuit automatically shuts down outputs to avoid
damaging external circuits. Trip point of O.V.P. circuit is
between 5.7~7.0V
Operating: 0~70°C
Storage: -40~+75°C
Operating: 5~95%; non-condensing at 40°C
AC Input/Output: Meets IEC 320/CEE 22 standard
Tab Terminals: Female 0.250" x 0.032"
CPU Board: Alex 8500-06 or equivalent device
3.5" Disk Drive: AMP 1-480424-0/171822-4 or equivalent device
14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes
156,598 hrs. |
|
